| Network Scope | 2G, 3G |
| Battery Type & Performance | Lithium-ion 1800 mAh Stand-by: up to 300 hours Talk-time: up to 7 hours |
| Body & Weight | 123.8 x 63.2 x 11.95 millimeter, - |
| Camera Features | Flash light, up to 4x zoom |
| Camera Resolution (Back) | 5 Megapixel |
| Camera Resolution (Front) | 2 Megapixel |
| Chipset | MTK6572M |
| Colors Available | Black |
| Display Size & Resolution | 4 inches, WVGA 480 × 800 pixels |
| Display Type | TN Touchscreen (G+G glass) |
| Graphic Processing Unit (GPU) | Mali 400 |
| Memory Card Slot | MicroSD, up to 32 GB |
| Operating System | Android KitKat v4.4.2 |
| Processor | Dual-Core, 1 GHz |
| RAM | 512 MB |
| ROM | 4 GB |
| Release Date | February 2015 |
| Sensors | Accelerometer, G-sensor |
| SIM Card Type | Dual SIM (dual stand-by) |
| USB | MicroUSB |
| Video Recording | 0.3 Megapixel (VGA) |
| Wireless LAN | Yes |
| Other Features | - Bluetooth, GPS, A-GPS, MP3, MP4, Radio, GPRS, Edge, Multitouch, Loudspeaker |
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
File Password
01725000669
Download Here
0 comments:
Post a Comment